|
|
|
|
| HX-C9 100 |
|
| Aromatic hydrocarbon resin |
HX-C9 100 is produced through the process of fractionation,thermal polymerization, flash evaporation and molding with the carbon nine as the raw material from ethylene fragmentation. This product is light yellow-brown granules, flakes or bulk solids with better transparency, gloss, compatibility,dissolvability of water, insulation, and excellent solubility and stability to the acid-base chemicals, and good bond and good thermal conductivity and so on.
 |
| Rubber compounding ,binder for asphalt ,shoe sole ,paint |
| Specific Gravity (25°C) |
1.09-1.13 |
ASTM D 71 |
| Softening Point (Ring & Ball, °C) |
100-110 |
ASTM D 28 |
| Color (Molten Resin, Ga.#) |
10-14# |
ASTM D 1544 |
| Idodine Value((gl2/100g) |
Max 60 |
ASTM D 1544 |
| Acid Value (KOHmg/g) |
Max 0.3 |
ASTM D 974 |
| Ash Content(%) |
0.05 |
150°C, 1hr |
| Fushunhuaxing and its marketing affiliates shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determation of its suitability and completeness for your own use, for the protection of the enviroment, and for the health and safety of employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale. |
| HX-C9 100 is available both in big bags of 500kgs or 1,000kgs net weight and in multi-ply paper bags of 25kgs net weight. |
Pelletized forms of resins may block or lump in hot weather climates or if stored near heat sources.
Inside storage is recommended and keep at temperature not exceeding 30°C |
|
|
|
|
|
|
